PE Customizer · CS3 Pro · firmware 1.71

Customize your CS3 Pro

01 · Connect

Connect the marker

Degas the marker. Remove the air system, loader and barrel. No paint.
Close E-Portal if it is open.
Plug the micro-USB cable and hold the power button about 3 seconds, until the yellow light blinks.
Press Connect and pick “Eclipse MME Bootloader”.

I just plugged it in and no other program has used it

Restore from a backup file

02 · Design

Pro · $11

Images and logos in the boot animation · Icon editor: redraw, replace or remove every icon · Full 4-frame animation at power-on, also on a double-click start · Hide the version screen · Inverted screen · Your own version screen · Sounds: your own power-on tune and beeps · Messages: your own words when it powers off

Pro checkout opens soon. If you already have a code, you can use it in the tool.

03 · Write

Write to the marker

Marker connected and recognised
Backup downloaded
Something to write

The site rewrites the marker's application with your changes, keeps your settings, then reads everything back and compares it. Takes two to three minutes. Do not unplug.

I checked the preview and want to write it

Independent DataPrime tool, not an Eclipse product. Use it with the marker degassed and without paint.